Daytime running lamp (drl)/front side marker lamp, Front fog lamps, Daytime running lamp (drl)/front side – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 382: Marker lamp

Advertising
background image

Daytime Running Lamp (DRL)/Front Side Marker
Lamp

NOTE:

Passenger side headlamp must be removed for

bulb replacement, for driver side headlamp go to step 6

through step 8.
1. Remove screw (1) on lower headlamp filler panel.
2. Remove screws (2) on upper headlamp filler panel.
3. Remove upper screw (1) from headlamp housing.
4. Remove lower screws (2) from headlamp housing.
5. Pull Headlamp forward.
6. Remove the DRL, side marker bulb by pulling straight

out.

7. Replace lamp as required and lock in place.
8. Reinstall plastic cap.

9. Carefully reinstall headlamp in the same position on

the vehicle, so as not to affect headlamp aiming.

10. Install upper screw (1) on headlamp housing.
11. Install lower screws (2) on headlamp housing.
12. Carefully reinstall screw (1) on lower headlamp filler

panel.

13. Carefully reinstall screws (2) on upper headlamp

filler panel.

Front Fog Lamps

1. Turn front wheels inboard to access cover in wheel

liner.

2. Open the cover on the front of the wheel liner.
3. Remove connection and replace the bulb.

380 MAINTAINING YOUR VEHICLE

Advertising