Sealing a tire with tire service kit, A) whenever you stop to use tire service kit, B) setting up to use tire service kit – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 302

Advertising
background image

WARNING!

(Continued)

Tire Service Kit Sealant solution contains latex. In

case of an allergic reaction or rash, consult a phy-
sician immediately. Keep Tire Service Kit out of
reach of children. If swallowed, rinse mouth imme-
diately with plenty of water and drink plenty of
water. Do not induce vomiting! Consult a physician
immediately.

Sealing A Tire With Tire Service Kit

(A) Whenever You Stop To Use Tire Service Kit:

1. Pull over to a safe location and turn on the vehicle’s

Hazard Warning flashers.

2. Verify that the valve stem (on the wheel with the

deflated tire) is in a position that is near to the ground.

This will allow the Tire Service Kit Hoses (6) and (7) to

reach the valve stem and keep the Tire Service Kit flat

on the ground. This will provide the best positioning

of the kit when injecting the sealant into the deflated

tire and running the air pump. Move the vehicle as

necessary to place the valve stem in this position

before proceeding.

3. Place the transmission in PARK (auto transmission) or

in Gear (manual transmission) and turn Off the igni-

tion.

4. Set the parking brake.
(B) Setting Up To Use Tire Service Kit:

1. Push in the Mode Select Knob (5) and turn to the

Sealant Mode position.

2. Uncoil the Sealant Hose (6) and then remove the cap

from the fitting at the end of the hose.

3. Place the Tire Service Kit flat on the ground next to the

deflated tire.

300 WHAT TO DO IN EMERGENCIES

Advertising