Parking brake – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 225

Advertising
background image

If necessary, add fluid to restore to the proper indicated

level. With a clean cloth, wipe any spilled fluid from all

surfaces. Refer to “Fluids, Lubricants, and Genuine Parts”

in “Maintaining Your Vehicle” for further information.

PARKING BRAKE
Before leaving the vehicle, make sure that the parking

brake is fully applied.
The parking brake lever is located on the outboard side of

the drivers seat. To apply the parking brake, pull the

lever up as firmly as possible. To release the parking

brake, pull the lever up slightly, press the release button

with your thumb, then lower the lever completely.

When the parking brake is applied with the ignition

switch in the MAR (ACC/ON/RUN) position, the Brake

Warning Light in the instrument cluster will illuminate.

Parking Brake

1 — Parking Brake Release Button
2 — Parking Brake Lever

5

STARTING AND OPERATING 223

Advertising