Towing tips, Automatic transmission, Tow/haul mode – Ram Trucks 2015 ProMaster Commercial - Owner Manual User Manual

Page 289: Electronic speed control — if equipped

Advertising
background image

Towing Tips
Before setting out on a trip, practice turning, stopping,

and backing up the trailer in an area located away from

heavy traffic.
Automatic Transmission
The DRIVE gear can be selected when towing. The

transmission controls include a drive strategy to avoid

frequent shifting when towing. However, if frequent

shifting does occur while in DRIVE, select TOW/HAUL

mode or select a lower gear range (using the Electronic

Range Select [ERS] shift control).
NOTE:

Using a lower gear range while operating the

vehicle under heavy loading conditions will improve

performance and extend transmission life by reducing

excessive shifting and heat build up. This action will also

provide better engine braking.

Tow/Haul Mode
To reduce the potential for automatic transmission over-

heating, activate the “TOW/HAUL” feature when driv-

ing in hilly areas, or select a lower gear range (using the

Electronic Range Select (ERS) shift control) on more

severe grades.
Electronic Speed Control — If Equipped

• Do not use in hilly terrain or with heavy loads.
• When using the speed control, if you experience speed

drops greater than 10 mph (16 km/h), disengage until

you can get back to cruising speed.

• Use speed control in flat terrain and with light loads to

maximize fuel efficiency.

5

STARTING AND OPERATING 287

Advertising