Updating firmware on second controller – Compaq RAID ARRAY 3000 EK-SMCPO-UG. C01 User Manual
Page 106
5-10 RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: f-ch5 Second Controller Option.doc Last Saved On: 12/4/00 1:48 PM
The saved configuration screen with a Restore from File field appears as
shown in the example of Figure 5-10.
Figure 5-10. Restored configuration example
NOTE: Restoring the configuration in the following step may take up to 5 minutes.
4.
Enter the file name that you saved in “Saving Existing Configuration”
and click Restore.
Updating Firmware on Second Controller
1.
After configuration has been restored, update firmware on the second
controller. Repeat the procedure in Section “Update Firmware Using
SWCC” or “Update Firmware Using Serial Interface”.
2.
After the configuration has been restored and firmware has been
updated, power down the system.