Compaq RAID ARRAY 3000 EK-SMCPO-UG. C01 - Manual (Page 72)

3-12 RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: d-ch3 Maintenance.doc Last Saved On: 12/4/00 1:50 PM
Figure 3-7 shows how to remove standoffs from the UPS and external fault
connectors.
3000-49
Figure 3-7. Remove standoffs from UPS and external fault connectors
11. Align the connectors on the replacement EMU with the connector holes
on the rear panel and replace the mounting studs to secure the board (Do
not over-tighten).
12. Reconnect the two ribbon cables to the rear connectors on the EMU
board.
13. Replace the side cover on the pedestal and secure it with the TORX-
head screw on the front bezel of the pedestal.
14. Replace the door on the pedestal.