Connecting to your dual controller storage system – Compaq RAID ARRAY 3000 EK-SMCPO-UG. C01 User Manual
Page 110
5-14 RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: f-ch5 Second Controller Option.doc Last Saved On: 12/4/00 1:48 PM
NOTE: If the storage window connection is lost when the cable is moved, reopen the
HSZ22 StorageWindow).
16.
Once the second Virtual Disk has been created, close the StorageWorks
window.
17.
To complete dual-controller configuration, perform the following:
■
Ensure all cables and connections to your server are in place
■
Leave the RA3000 Rack Mount Storage System powered on
■
Reboot the server
Refer to the Getting Started RAID Array 3000 Installation Guide for your host
system to configure the virtual disks as communications LUNs.
Connecting to Your Dual Controller Storage System
1.
Open the StorageWorks management utility.
2.
Refer to the Getting Started RAID Array 3000 Installation Guide for
your host system for instructions describing how to connect the RA3000
to your host system.