Figure 1-7. ultrascsi bus configuration switch, Figure 1-8. slot locations and scsi id addresses – Compaq RAID ARRAY 3000 EK-SMCPO-UG. C01 User Manual
Page 27
Advertising
Product Overview 1-11
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: b-ch1 Product Overview.doc Last Saved On: 12/4/00 1:51 PM
The subsystem can be reconfigured for through-bus operation by modifying
the bus and resetting the internal configuration switch. The information needed
to reconfigure the bus from split-bus to a through-bus configuration is
described in Chapter 4 “Expansion Pedestal Option”.
3000-38
6
Figure 1-7. UltraSCSI bus configuration switch
SLOT 0
SLOT 1
SLOT 2
SLOT 3
SLOT 4
SLOT 5
SLOT 6
ID = 8
Controller
Device
Port 0
Device
Port 1
ID = 10
11
8
3000-52
Figure 1-8. Slot locations and SCSI ID addresses
Advertising