Ciprico 6500 - Manual (Page 42)

21020690 B 6500 Disk Array User’s Guide
Chapter 3 Display/Operation Panel
Page 3 - 12 ARRAY OPTIONS
PASSWORD The password option allows you to set or clear the array's password protection
feature. When set, the password is a user-entered series of four display/
operation panel keystrokes—any key can be used
except the RESET key.
Enter a New Password
Enter a new password as follows:
1. Press the down arrow, then press the right or left arrow until
)81&7,21 6(/(&7$55$< 237,216 appears.
2. Press the down arrow.
3. Press the right or left arrow until
3$66:25' appears.
4. Press the down arrow to view the
(17(5 3$66:25' menu. If &/($5
3$66:25' is displayed, press the right key once to show (17(5
3$66:25'.
5. Press the down arrow.
6. Press four keypad keys in sequence (do not use the RESET key in this
sequence), and be sure to note the keys you enter (see example at left:
left, left, down, up). This four-key sequence will be your new password.
As each password key is pressed, an asterisk is displayed in the panel.
When the fourth key is pressed,
3$66:25' 6(7 is displayed.