Enclosure top cover removal, Power down the array, Remove ac power cord – Ciprico 6500 User Manual
Page 68: Unlock and open front cover of enclosure (see t, Remove the screws in the enclosure’s front surf, Lift the front of the top cover, Slide the top cover toward the rear of the encl, Lift top cover from enclosure, Replacement, Figure 18 top cover removal
Advertising
21020690 B
6500 Disk Array User’s Guide
Chapter 4 Maintenance, Troubleshooting & Hardware Replacement
Page 4 - 14
Enclosure Top Cover Removal
Enclosure Top
Cover
Removal
1.
Power down the array.
2.
Remove AC power cord.
3.
Unlock and open front cover of enclosure (see the figure below).
4.
Remove the screws in the enclosure’s front surface that secure the top
cover to the enclosure.
5.
Lift the front of the top cover.
6.
Slide the top cover toward the rear of the enclosure to disengage the
cover’s hooks from their slots.
7.
Lift top cover from enclosure.
Replacement
Reverse the steps above.
Figure 18 Top Cover Removal
Advertising