Antenna connections, Connecting the supplied antennas, Preparation – Aiwa CX-N4000 U User Manual
Page 14: Connection -► id, Positioning fm feeder antenna, Positioning am loop antenna, Connecting an outdoor antenna, S'©j
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
ANTENNA CONNECTIONS
CONNECTING THE SUPPLIED ANTENNAS
Connections differ according to the suffix of the model number on
the rear of your unit.
Preparation
• Untie the suppiied FM feeder antenna.
• Stand the supplied AM ioop antenna on a surface by fixing the
ciaw to the slot. -> □
IE
Connection -► ID
Push the lever of each terminal, and insert the conductor. Then,
release the lever to lock.
FM: Connect the conductor of the FM feeder antenna © to the FM
75Q terminals.
AM:
Connect the conductor of the AM loop antenna @ to the AM
LOOP terminals.
Positioning FM feeder antenna
Extend this antenna horizontally in a T-shape and fix its ends to the
wail with cellophane tape.
Positioning AM loop antenna
To fix it to the wall, use screw.
Find the best position for reception, and fix this antenna vertically.
ID
S'©J
NOTE
■ Do not bring the ends of the FM feeder antenna near metal objects
or curtain rails.
’ Do not unwind the AM loop antenna wire.
' Do not bring the AM loop antenna near a turntable system, CD
player, TV monitor, or the stereo system itself, or close to the AC
cord or speaker cords, since noise will be picked up.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is recom
mended.
Connect the outdoor antenna to the FM 75Q terminals. -» Q
ANTENNA
TFM
75 n
14