Aiwa CX-N4000 U - Manual (Page 28)

CD PLAYING
BASIC OPERATIONS
1
2,4
-DISC
DIRECT
PLAY
CD
A OPEN/CLOSE
d)
A OPEN/CLOSE
DIR/PRESET
r u
liilp
1 Press the CD button.
The power is turned on and the button lights in red.
If a disc is inserted
You can turn the unit on and begin play by pressing the CD
button (direct play function).
2 Press the ^ OPEN/CLOSE button to open the disc
compartment.
3 Load disc(s) with the iabei side up.
® To play one or two discs
Place the discs on trays 1 and 2.
® To play three discs
After placing two discs, press the DISC CHANGE button to
rotate the trays. Place the next disc on tray 3.
NOTE
To load an 8-cm (3-inch) disc, put it onto the inner circle of the
tray.
4 Press the ^ OPEN/CLOSE button to close the disc
compartment.
DISPLAY
® Selected disc number
@ Total playing time of the selected disc
(3) Total number of tracks on the selected disc
@ Music calendar
Note that only the first 20 tracks are displayed, even if the
disc contains 21 tracks or more.
5 Press the button to start piay.
Play begins with the disc on tray 1. All the discs are played once.
DISPLAY
@ Number of track being played
@ Playing time of track
(3) Number of track being played flashes.
During playback
A tray which has no disc is skipped and play proceeds to the next
tray. The indicator of the skipped disc number goes out in the
display.
To stop play
Press the ■ button.
To stop and open the tray at the same time, press the ^ OPEN/
CLOSE button.
To pause
Press the II button.
In pause mode, the II button flashes.
To resume play, press it again.
28