CLIFFORD RSIII - Manual (Page 29)

26 © 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .
All arm/disarm page notifications will still be generated by the
remote control in silent mode.
panic mode
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your remote control. Just
press for two seconds, and you will enter Panic Mode. The
siren will sound and the parking lights will flash. To stop Panic
Mode press on the remote control again.
The remote control will beep twice (or vibrate) when the system
enters panic mode. The remote control will not generate a Page
Notification when panic mode is exited.
valet mode
You can prevent your security system from passive arming by
using Valet Mode. This is very useful when washing the vehicle
or having it serviced. In Valet Mode, the security system will not
arm, even with the remote control, but all convenience functions
(door locks, trunk release, remote starting, etc.) will continue to
work normally.
➜
note: Once Panic Mode has been entered, the siren will
sound for 30 seconds.
➜
note: The Warn Away ® response to lighter impacts is
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering. Only the Warn Away
® response is bypassed.