CLIFFORD RSIII User Manual
Page 41
38
© 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .
table of zones
A zone is represented by the LED flashes and remote control LCD
icons used by the system to identify a particular type of input.
Standard input assignments are listed in the following table.
ZONE
(Number of
LED Flashes)
DESCRIPTION
LCD Icon
1
Instant trigger - trunk pinswitch
19
2
Shock trigger (-) - Full trigger and
17
Warn Away
®
of Sensor 1
3
Door switch trigger
9
4
Optional Sensor (-) - Full trigger and
18
Warn Away
®
5
Ignition trigger
15
6
hood pinswitch
14
interpreting zone diagnostics
Warn Away responses are not reported by the arming or
disarming diagnostics. If you receive a Bypass notification when
arming or a Tamper Alert notification when disarming, look at
the LED or remote control LCD. Active or triggered zones will
be indicated by a pattern of blinks by the LED or the remote
control icon will indicate the triggered zone.
Example
If Zone 3 was active or triggered, the LED will blink three times
with a two-second pause. Then it will blink three times again,
➜
➜