CLIFFORD RSIII User Manual
Page 51
48
© 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .
response while harder impacts will generate a full-trigger response.
Remote Control:
A hand-held device that operates the various
functions of your system and communicates system status.
Triggered Sequence:
This is what happens when the alarm “goes
off ” or “trips.” The triggered response of your system consists of
the siren sounding and parking lights flashing for the
programmed duration.
Valet Switch:
A small push button mounted at a discretionary
location inside the vehicle. It is used to override the starter inter-
rupt when a transmitter is lost or damaged, or to enter or exit
Valet Mode and for programming when the 998T Bitwriter is
not available.
Warn Away Response:
Lighter impacts to the vehicle will
generate the Warn Away response. It consists of several seconds
of siren chirps and parking light flashes.
Zone:
A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular
zone. Often two or more inputs may share the same zone.