CLIFFORD RSIII - Manual (Page 45)

42 © 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .
➤ Power Saver in Valet ® Mode: When the system enters Valet ®
Mode the LED illuminates steadily. If the vehicle is not used
(ignition is not turned on) for a one hour period while the
system is in Valet ® Mode, the LED will shut off. If the
system remains in Valet ® Mode, the LED will come back on
the next time the ignition is turned on and then back off.
p prro og grra am mm miin ng g o op pttiio on nss
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some
may require installation labor.
The following is a list of the programmable options, with the
factory settings in Bold.
➤ A Accttiivvee arming (remote control only) or passive arming
(automatic arming 30 seconds after the last door has been
closed).
➤ Arming/disarming siren chirps oon n or off.
➤ The ignition controlled door lock feature oon n or off: When
this feature is programmed on, the doors will lock three
seconds after the ignition is turned on, and unlock when the
ignition is turned off. If your installer is programming the
security system with the Directed Bitwriter, ignition lock
and unlock are independent features that can be
programmed separately.