Recording only one track opaco, Programmed recording of a cd, To stop recording before the end of the track – Aiwa CSD-MD50 User Manual
Page 20: To stop recording halfway, To change the display during recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECORDING ONLY ONE TRACK
O P A C O
PROGRAMMED RECORDING OF
A CD
Up to 20 tracks can be programmed and recorded on an MD.
-0-9,+10
1 Insert a recordable MD into the disc drive with
the label side up and in the direction of the arrow.
2 Load a CD and press the CD ^ button.
Playback starts.
3 Select the desired track.
Use the or ►► button, the MULTI JOG dial, or the
numbered buttons on the remote control to play back the
desired track.
4 Press the CD ► MD button to start recording.
The CD returns to the beginning of the track and recording
starts.
When the track of the CD finishes playing, fhe recording stops
automatically, while the CD goes to the next track.
When recording stops, TOC-EDIT flashes on the display and
the contents (TOC) of the recording are recorded on the MD.
To stop recording before the end of the track
Press the ■ button. Recording to the MD stops, and the contents
(TOC) of the recording are recorded on the MD.
To stop play of fhe CD, press the ■ button again.
DISPLAY
1 Insert a recordable MD into the disc drive with
the label side up and in the direction of the arrow.
2 Load a CD and press the FUNCTiON button on
the remote control to select CD.
3 In stop mode, press the MODE button repeatedly
until PROGRAM? appears on the display.
4 Within 5 seconds, press the ENTER button.
5 Turn the MULTI JOG dial to select a track to be
programmed, and press the ENTER button.
6 Repeat step 5 to program other tracks.
For detailed explanations on how to program the tracks, see
page 12.
7 Press the CD ► MD button to start recording.
Recording begins.
When the programmed tracks finish playing, the recording
stops automatically.
When recording stops, TOC-EDIT flashes on the display and
the contents (TOC) of the recording are recorded on the MD.
To stop recording halfway
Press the ■ button. Recording to the MD stops, and the contents
(TOC) of the recording are recorded on the MD.
To stop play of the CD, press the ■ button again.
To change the display during recording
Pressing the DISP button (or the DISPLAY button on the remote
control) changes the information shown on the lower part of the
display as follows.
® Elapsed playing time of the track being recorded
(D
Remaining playback time of the current track
- @ Remaining recording time
20
ENGLISH