Aiwa CSD-MD50 - Manual (Page 22)

MD EDITING
REGISTERING THE DISC TITLE
AND TRACK TITLE___________
You can register the titles of the discs and tracks.
1 Insert an MD to register the disc or track title,
and press the FUNCTION button on the remote
control to select the MD function.
2 To register a disc title, press the EDIT button in
stop mode repeatedly until Disc Title? appears.
To register a track title, select or play back the
track and press the EDIT button repeatedly until
Track Title? appears.
3 Within 10 seconds, press the ENTER button.
The unit turns into character entry mode.
4 Press the MODE button repeatedly to select the
kind of character.
Capitai ietters —► Smali ietters
■ Number/symbois
I.
■V: ...! •'ilYilli
L I I'U J
U LI* I L
5 Turn the MULTI JOG dial to select a desired
character.
To change a character
Press the ◄◄ or ►► button repeatediy until the character to
be changed flashes. Then enter the desired character again.
To delete characters
Press the ◄◄ or ►► button repeatedly until the character to
be deleted flashes. Then press the II button.
To insert a space between the characters
Press the ◄◄ or ►► button repeatedly until the part to be
entered as a space flashes. Then press the DISP button.
To add a character between two characters
First, insert a space between two characters as described above.
Then change the space to the desired character by entering it.
NOTE
• While TOC-EDIT is flashing, do not disconnect the AC cord or
do not give a strong shock to the unit. If this happens, the data
of TOC will not be recorded properly and the edited contents
on a disc will not be able to be played.
' A title cannot be registered in the following cases:
-When a prerecorded disc is inserted ("PB DISC" appears on
the display.)
-When the protect-tab on an inserted disc is moved to the
protected position ("Protected" appears on the display.)
' Editing an MD will cancel the random play mode.
• Editing cannot be performed when the unit is in the programmed
play mode.
CHARACTERS THAT CAN BE REGISTERED
Capital letters
□ (space) A B C D E F G H I J K L M N O P Q R
S T U V W X Y Z
Small letters
□ (space) a b c d e f g h i j k i m n o p q r s t u v
w X y z
Numbers and symbols
□ (space) 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * +
T
iF;;riB!ji...iiia
I J L I H \ j
ILESSza^ UU-"IL
6 Press the button.
7 Repeat steps 4 to 6 to enter all the required
characters (up to 50 characters).
If you leave the unit without performing any operation for one
minute in steps 4 to 6, the character entry mode will be
canceled. If this happens, repeat from step 2.
8 Press the ENTER button.
The entered disc title or track title is displayed.
When registering a track title during playback, the track will
be repeatedly played until the ENTER button is pressed.
When the MD is removed from the unit, TOC-EDIT flashes
and the entered title is registered.
22
ENGLISH