ADLINK nanoX-BT - Manual (Page 50)

Page 50 nanoX-BT
7.3.11. Serial Port Console
Feature Options Description
Serial Port Console Info only
COM0 Info only
Console Redirection Disabled
Enabled Console Redirection enable or disable.
Console Redirection Settings Submenu The settings specify how the host computer and the remote
computer (which the user is using) will exchange data. Both
computers should have the same or compatible settings.
COM1 Info only
Console Redirection Disabled
Enabled Console Redirection enable or disable.
Console Redirection Settings Submenu The settings specify how the host computer and the remote
computer (which the user is using) will exchange data. Both
computers should have the same or compatible settings.
7.3.11.1. Serial Port Console > Console Redirection Settings
Feature Options Description
COM0/COM1 Console Redirection Settings Info only
Terminal Type VT100
VT100+
VT-UTF8
ANSI VT100: ASCII char set.
VT100+: Extends VT100 to support color, function keys, etc.
VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or
more bytes.
ANSI: Extended ASCII char set.
Bits per second 9600
19200
38400
57600
115200 Selects serial port transmission speed. The speed must be
matched on the remote computer. Long or noisy lines may
require lower speeds.
Data Bits 7
8 Select data bits.
Parity None
Even
Odd
Mark
Space Select parity.
Stop Bits 1
2 Select number of stop bits.
Flow Control None
Hardware RTS/CTS Select flow control.
VT-UTF8 Combo Key Support Disabled
Enable Enable VT-UTF8 combination key support for ANSI/VT100
terminals.
Recorder Mode Disabled
Enable With this mode enabled only text will be sent. This is to capture
terminal data.
Resolution 100x31 Disabled
Enable Enables or disables extended terminal resolution
Legacy OS Redirection 80x24
80x25 On legacy OSes, the number of rows and columns supported by
redirection
Putty KeyPad VT100
LINUX
XTERMR6
SCO
ESCN
VT400 Select FunctionKey and KeyPad on Putty.