ADLINK nanoX-BT - Manual (Page 8)

Page 8 nanoX-BT
1. Introduction
The nanoX-BT is a COM Express® COM.0 R2.1 Type 10 module supporting Intel® Atom™ processor E3800 Series and Intel® Celeron®
processor system-on-chip (SoC). The nanoX-BT is specifically designed for customers who need high-level processing and graphics
performance with low power consumption in a long product life solution.
The nanoX-BT features Intel® Atom™ processor E3800 and Intel® Celeron® processor supporting non-ECC type DDR3L single-channel
memory at 1066/1333 MHz to provide excellent overall performance. Integrated Intel® Gen7 HD Graphics includes features such as
OpenGL 3.1, DirectX 11, OpenCL 1.1 and support for H.264, MPEG2, VC1, VP8 hardware decode. Graphics outputs include DDI ports
supporting HDMI/DVI/DisplayPort and single-channel 18/24-bit LVDS (eDP is optional). The nanoX-BT is specifically designed for customers
with high-performance processing graphics requirements who want to outsource the custom core logic of their systems for reduced
development time.
The nanoX-BT has soldered type non-ECC DDR3L memory up to 2 GB (4GB TBD). In addition, onboard eMMC memory (8GB/16GB/32GB)
and SD signals are optionally supported.
The nanoX-BT features a single onboard Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 3 Gb/s ports. Support is
provided for SMBus and I
2 C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console,
CMOS backup, hardware monitor, and watchdog timer.