Ditch Witch JT25 - Manual (Page 122)

JT25 Operator’s Manual
Systems and Equipment - 121
Tracker Control
CMW
Tracker Control
Overview
This mode allows the Ditch Witch Tracker operator to disable hydraulic power to drilling unit thrust and
rotation.
Use tracker control any time you change downhole tools or during other times when the drill string is
exposed. Tracker control works by stopping communication between the tracker and the display. When
this happens, the green tracker control light on the drilling unit flashes and thrust and rotation are disabled.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
IMPORTANT: This mode does not disable thrust and rotation immediately. Functions are disabled within
16 seconds. Thrust and rotation are disabled when green light on drilling unit is flashing.