Ditch Witch JT25 - Manual (Page 166)

JT25 Operator’s Manual
Service - 165
Recommended Lubricants/Service Key
CMW
Recommended Lubricants/Service Key
Item Description
Tier 4i
DEO Diesel engine oil meeting or exceeding Cummins 20081, API CJ-4, ACEA E9.
• Engine must use low SAPS oil (ash will plug aftertreatment device.)
• Use viscosity grade SAE 15W40 unless ambient temperatures below 5° F (-15° C) are expected. Lower
viscosity oils must meet the performance specifications shown above.
API American Petroleum Institute, ACEA European Automobile Manufacturer’s Association.
Tier 3
DEO Diesel engine oil meeting or exceeding Cummins 20078, API CH-4, ACEA E5.
NOTICE: Shipped from factory with CJ-4 DEO. Change oil initially at 250 hrs.
Use viscosity grade SAE 15W40 unless ambient temperatures below 5° F (-15° C) are expected. Lower
viscosity oils must meet the performance specifications shown above.
API American Petroleum Institute, ACEA European Automobile Manufacturer’s Association.
NDO SAE 30 Non-detergent oil
MPG Multipurpose grease. Use polyurea based NLGI GC-LB Grade 1.5 or lithium based
NLGI GC-LB Grade 2.
EPG Open gear extreme pressure lubricant (p/n 256-666)
EPS Open gear extreme pressure lubricant, spray (p/n 256-034)
MPL Multipurpose gear oil meeting API service classification GL-5 (SAE 80W90)
THF Tractor hydraulic fluid, similar to Phillips 66 HG, Mobilfluid 424, Chevron Tractor
Hydraulic Fluid, Texaco TDH Oil, or equivalent
TJC Tool joint compound: Ditch Witch standard (p/n 259-858) or summer grade (p/n 256-
031)
DEAC Diesel engine antifreeze/coolant meeting ASTM D5345 (prediluted) or D4985
(concentrate)
Check level of fluid or lubricant
Check condition
Filter
Change, replace, adjust, service or test