Set-up console, Jt25 operator’s manual – Ditch Witch JT25 User Manual
Page 23
Controls - 22
JT25 Operator’s Manual
Set-Up Console
Set-Up Console
1.
Engine shutdown override switch
2.
Rear hood switch
3.
Cold start wait indicator
4.
Ignition switch
5.
Right track switch
6.
Left track switch
7.
Right stabilizer control
8.
Left stabilizer control
9.
Back frame tilt control
10. Front frame tilt control
Item
Description
Notes
1.
Engine shutdown
override switch
If engine shutdown indicator
comes on, turn ignition switch
to STOP and press to delay
engine shutdown for 30
seconds.
This control allows a temporary
override of engine shutdown.
NOTICE: After 30 seconds, engine
will again shut down unless fault
condition has been cleared on
diagnostic gauge.
IMPORTANT: See “Electronic
Controlled Engine Overview” on
page 142 for more information on Tier
3 engines.
11
22
33
44
55
66
77
88
99
10
10
j37om004h.eps
j37om004h.eps
c00ic178h.eps