Hatteland Display 19 inch - HM 19T14 MMD (TEMPEST) - Manual (Page 21)

21 Operation
User Controls
IND100064-31
MENU function as:
Power On/Off & On Screen Display (OSD) menu access.
LEFT (◄) function as:
Direct Access / Hotkey, exit the current function and navigate to the previous OSD menu.
RIGHT (►) function as:
Direct Access / Hotkey, enter sub-menu & execute/set selected function.
UP (+) function as:
Increase brightness, adjust positive values, visual movement, OSD menu navigating upwards & confirm.
DOWN (-) function as:
Decrease brightness, adjust negative values, visual movement, OSD menu navigating downwards & confirm.
DIRECT ACCESS / HOTKEY FUNCTION
You can access a number of functions from within the OSD Menu which is normally only accessible by
browsing through the OSD Menu and locate the function manually. The Direct Access function are assigned
to the Left and Right buttons to function as hotkeys. Note that some functions are dual (increase/decrease)
or just single (swap/next). Those with single functionality both the left and right keypad button will perform the
same action.
To configure the Direct Access / Hotkeys functionality, just press one of the buttons inwards and release it
instantly, detection time is immediate.
Available assigned functions for Direct Access are: Brightness, PIP Size, Main Source, Second Source,
Alpha Blend, Video Scaling, Swap Source, Test Pattern and No Function.
Please review the “OSD Menu Function” chapter for configuring the direct access / hotkeys functionality.
Push Buttons
+Direct Access / Hotkeys
Left / Hotkey button
Status LED Ring
Right / Hotkey button
Up (+) button
Down (-) button
Power / Menu button
KEYPAD FUNCTIONALITY