Hatteland Display 19 inch - HM 19T14 MMD (TEMPEST) - Manual (Page 33)

33 User Controls
IND100064-21
OSD Menu Functions
Display / Picture / Advanced Settings / Horz Position
Move the horizontal (left/right) position of the entire display area. This applies to the Main Source signal.
Please note that this function can move information in the image outside the visible display area, so use
caution when modifying this parameter.
● Level adjusts from 0-100 steps. 50 is default.
Display / Picture / Advanced Settings / Vert Position
Move the vertical (up/down) position of the entire display area. This applies to the Main Source signal.
Please note that this function can move information in the image outside the visible display area, so use
caution when modifying this parameter.
● Level adjusts from 0-100 steps. 50 is default.
Display / Picture / Advanced Settings / Widescreen Mode
This will force the display controller to scale the image to match the incoming signal from typical radar
systems with a custom resolution of 1360x1024. Since the display controller are unable to automatically
detect the difference between this resolution and 1280x1024, the user have the option to manually set the
display to the required resolution. Setting the resolution to 1280x1024 will only use the native TFTs panel
resolution (for 19inch only). For other TFT sizes it will use the native TFT panel resolution instead (1:1).
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.
Display / Picture / Advanced Settings / Signal Support
This will force the display controller to scale the image to match the incoming signal from typical radar
systems with a custom resolution of 1066x800i (default setting) and 1056x792i.
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.
Display / Picture / Advanced Settings / RGB Calibrate
Warning! The displayed image MUST be a black/white image (color/gray scale image not usable). If not, the
calibration will produce wrong color values!
Function only available in “Full” menu mode and when analog VGA/RGB signal are set as Main Source.
This function will automatically calibrate the R(red), G(green), B(blue) signal gain values, also known as
the color intensity to a neutral and a normalized level. This function will also override any previous color
adjustments done by user in the OSD menu. It will also override the Kelvin color temperature setting and
affects the Main Source signal.
● Press the right (►) button to activate. A confirmation requester will appear. Use +/- to confirm.
Display / Picture / Swap Source
This function will be available if PIP/PBP is on, please see [ Display / Source / xxx / xxx ].
This function will swap the image in fullscreen and the window overlay. It will choose whatever signal inputs
set in the [ Display / Source / xxx / xxx ] setting as Main Source and Second Source.
● Press the right (►) button to activate in real-time. The OSD menu will still be visible.