Hatteland Display 19 inch - HM 19T14 MMD (TEMPEST) - Manual (Page 32)

32 User Controls
IND100064-21
OSD Menu Functions
Display / Picture / Advanced Settings / Graphic Scaling / One to One
Function only available in “Full” menu mode & when analog DVI/VGA/RGB signal are set as Main Source.
Set the image scaling to 1:1. This means that the incoming signal is shown as is (with
correct aspect ratio) and without any scaling to fit the display area. If the image appears to have black bars
at top/bottom or/and left/right area, the external signal source is the cause of this. It does not support the
signal in respect of what the native TFTs panel resolution requires.
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.
Display / Picture / Advanced Settings / Graphic Scaling / Fill Screen
Function only available in “Full” menu mode & when analog DVI/VGA/RGB signal are set as Main Source.
Set the image scaling to fit the entire native TFT panel resolution. This means that the incoming signal is
shown (without correct aspect ratio) and with scaling to fit the entire display area. The result is that the
image will appear stretched. The external signal source is the cause of this. It does not support the signal in
respect of what the native TFTs panel resolution requires.
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.
Display / Picture / Advanced Settings / Graphic Scaling / Fill Aspect Ratio - DEFAULT
Function only available in “Full” menu mode & when analog DVI/VGA/RGB signal are set as Main Source.
Set the image scaling to fit the entire native TFTs panel resolution based on correct aspect ratio (factory
default). This means that the incoming signal is scaled to best possible fit within the entire display area. The
result is that black bars might be visible in top/bottom and/or left/right area. The external signal source is
the cause of this. It does not support the signal in respect of what the native TFT panel resolution requires.
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.
Display / Picture / Advanced Settings / Graphic Scaling / Anamorphic
Function only available in “Full” menu mode & when analog Comp/S-VHS signals are set as Main Source.
Will scale the widescreen image to fit a 4:3 or 5:4 native TFTs panel resolution. Anamorphic widescreen is a
video technique that utilizes rectangular (wide) pixels to store a widescreen picture into standard 4:3 format.
The result is that black bars will be visible in top/bottom area. The external signal source is the cause of
this. It does not support the signal in respect of what the native TFT panel resolution requires. If the TFT
panel is not of a widescreen type, this option must be selected to prevent the widescreen signal for being
scaled in height and appear very stretched.
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.
Display / Picture / Advanced Settings / Graphic Scaling / Auto
Function only available in “Full” menu mode & when analog Comp/S-VHS signals are set as Main Source.
The display controller will automatically try to identify the incoming signal and scale the image with respect
of the aspect ratio and the TFTs native resolution to best possible fit the image on the entire display area.
Since this is a automatic and electronically intelligent function it may not work correctly with all signal types.
You may have to choose one of the other graphic scaling techniques above to get the correct/desired
image apperance.
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.