Hatteland Display 19 inch - HM 19T14 MMD (TEMPEST) - Manual (Page 30)

30 User Controls
IND100064-21
OSD Menu Functions
Display / Picture / PIP-PBP Adjustment / PIP Size
To enable this function, please see [ Display / Source / xxx / xxx ] later in this section of the manual.
Increase/decrease the Picture-In-Picture and Picture-By-Picture window sizes. These functions will allow
any of the signal inputs to be placed as an real time window overlay (or side by side if using PBP) on top
of the current Main Source signal enabling the main feature of the Maritime Multi Display functionality.
● Max PIP H size = 656 pixel
● Max PIP V size = Max PIP H size x Panel V resolution / Panel H resolution
● Min PIP H size = 256 pixel
● Min PIP V size = Min PIP H size x Panel V resolution / Panel H resolution
● 40 pixel each step.
Display / Picture / PIP-PBP Adjustment / H Position
To enable this function, please see [ Display / Source / xxx / xxx ] later in this section of the manual.
Move the horizontal (left/right) position of the real time window overlay.
● Level adjusts from 0-100 steps. 0 is default.
Display / Picture / PIP-PBP Adjustment / V Position
To enable this function, please see [ Display / Source / xxx / xxx ] later in this section of the manual.
Move the vertical (up/down) position of the real time window overlay.
● Level adjusts from 0-100 steps. 0 is default.
Display / Picture / PIP-PBP Adjustment / Alpha Blend
To enable this function, please see [ Display / Source / xxx / xxx ] later in this section of the manual.
Increase/decrease the alpha blend also known as transparency of the real time window overlay. It means
that the Main Source signal will show through the PIP image. It is used when important information
in the Main Source signal behind the window overlay is neccessary to be visible at all times.
● Level adjusts from 0-100 steps. 100 is default.
Display / Picture / PIP-PBP Adjustment / PIP Picture / Brightness
To enable this function, please see [ Display / Source / xxx / xxx ] later in this section of the manual.
Increase/decrease the overall brightness of the window overlay. This will not change the brightness of the
Main Source signal behind the window overlay. It can be used for situations where the incoming video
signal from CCTV or other video sources appear to dark in comparsion to the Main Source signal.
● Level adjusts from 0-100 steps. 50 is default.
Display / Picture / PIP-PBP Adjustment / PIP Picture / Contrast
To enable this function, please see [ Display / Source / xxx / xxx ] later in this section of the manual.
Increase/decrease the overall contrast of the window overlay. This will not change the contrast of the Main
Source signal behind the window overlay. It can be used for situations where the incoming video signal
from CCTV or other video sources appear to “washed out” in comparsion to the Main Source signal.
● Level adjusts from 0-100 steps. 50 is default.