Hatteland Display 19 inch - HM 19T14 MMD (TEMPEST) - Manual (Page 38)

38 User Controls
IND100064-21
Display / Setup / User Settings / Splash Screen
Function only available in “Full” menu mode.
Enable/disable the Splash Screen logo upon power on for the unit and while the display controller is
initalizing. It will be gone as soon as the signal input appear on screen. This is by factory default shown as
manufacturer’s brand logo. This can also be customized to show customer logo.
Display / Setup / Load Default / Factory Default
This function will reset everything to factory default settings. It will not revert back to a possible set of saved
user defaults stored in the display controller software. All signal inputs and image adjustments will be reset.
This function can be used in cases where you suspect a faulty or unsuitable configuration of the display is
present. It can also be used in trouble-shooting situations to determine that the display are not or are the
reason for a faulty or undesirable operation. The problem may be from external equipment.
● Press the right (►) button to activate. A confirmation requester will appear. Use +/- to confirm.
Display / Setup / Load Default / DDC Setup / Default DDC
Function only available in “Full” menu mode.
This function will detect the TFT panel specifications (EDID data) and update it via the DDC (Display Data
Channel) to the display controller. It is to make sure the TFT panel’s specifications can be detected
succesfully by the display controller software. This can be used in trouble-shooting situations to determine
that the display are not or are the reason for a faulty or undesirable operation. The problem may be from
external equipment.
● Press the right (►) button to activate. A confirmation requester will appear. Use +/- to confirm.
Display / Setup / Load Default / DDC Setup / Fixed DDC
Function only available in “Full” menu mode.
This function will force the TFT panel specifications (EDID data) and update it via the DDC (Display Data
Channel) to the display controller with the choice selected regardless of the original TFT panel’s preferred
specifications. This can be used in trouble-shooting situations to determine that the display are not or are
the reason for a faulty or undesirable operation. The problem may be from external equipment.
Available choices are: 1920x1200, 1600x1200, 1280x1024, 1360x768, 1024x768, 800x600, 640x480.
● Press the right (►) button to activate. A confirmation requester will appear. Use +/- to confirm.
Display / Setup / Load Default / Load User Default
This function will restore any User Default settings that have been saved previously. If no User Defaults
was found, nothing will be re-configured. The User Defaults consists of custom settings and all parameters
adjusted in the entire OSD Menu by user. This can be used in trouble-shooting situations to determine that
the display are not or are the reason for a faulty or undesirable operation. The problem may be from
external equipment.
● Press the right (►) button to activate. A confirmation requester will appear. Use +/- to confirm.
OSD Menu Functions