Hatteland Display 19 inch - HM 19T14 MMD (TEMPEST) - Manual (Page 45)

Specifications - HM 19T14 MMD-AAT-AOBA
45
IND100129-121
All specifications are subject to change without prior notice!
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
2/2
• Optical Bonding Technology
• High Quality SHARP TFT
• 19.0 inch viewable image size
• Active Matrix, Thin Film Transistor (TFT)
• MVA Premium™ Technology
Sync Signal:
• Digital separate synchronization
• Composite synchronization
• Synchronization on green
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronization Range:
• Horizontal : 15,0 kHz to 91,1 kHz
• Vertical : 60 Hz* to 85 Hz
* Recommended for optimal picture quality
• 483.00 (W) x 444.00 (H) x 82.00 (D) mm
• 19.02" (W) x 17.48" (H) x 3.23" (D) inch
• Weight: 11.50 kg (approx)
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) ClassNK - Nippon Kaiji Kyokai
GL - Germanischer Lloyd DNV - Det Norske Veritas
ABS - American Bureau of Shipping BV - Bureau Veritas
• VSD100692-x = Custom Multifunction Cable to support more input
signals, like: RS-232, RS-485, RS-422/485, Buzzer,
ON/OFF, 1 x S-Video IN, 3 x Composite Video IN,
Remote External User Controls.
• JH MMDBR STD-A1 = Bracket
• JH 19BRD STD-A1 = Mounting Bracket EN60945 Tested
• JH MMDRO STD-A1 = Rotary Bracket
• JH 19TSV STD-A1 = Sun Visor
• JH 19VED STD-A1 = Vesa Bracket
• JH 19TAP STD-A1 = 21" CRT Adapter frame
• JH 19TAP STD-B1 = 21" CRT Custom Adapter frame
• JH 19TAP STD-A2 = 20" TFT Adapter frame
• JH 19TWC STD-B1 = Water Cover
*Please see user manual for drawings/measurements.
• Operating : Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating : Protection (EN60529): IP66 front - IP20 rear
• Compass Safe Distance : Standard: 160cm - Steering: 105cm
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768
• SXGA : 1280 x 1024*
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200
* Recommended for optimal picture quality
Video Signals (with Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
Power Supply:
• 115&230VAC - 50 / 60Hz
Power Consumption:
Operating : 100W (max)
• DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
• RGB Signal IN : 1 x 15p HD D-SUB (female)
• RGB Signal OUT : 1 x 15p HD D-SUB (female) - Clone of RGB IN**
• Multifunction : 1 x 160p D-SUB (female) - See TEMPEST Config.
• USB I/O : 1 x TYPE B Con. (female) Not connected/Not used
• AC Power IN : 1 x Std IEC Inlet
• AC Power OUT : 1 x Std IEC Outlet
**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the
RGB input. The output is working even if the display unit is turned off, but power cable/supply must
be connected/provided.
On front bezel - Potmeter control (IP66):
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control)
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
• Buzzer
• Color Calibrated models (ECDIS)
• Pixel Number : 1280 x 1024
• Pixel Pitch (RGB) : 0.294 (H) x 0.294 (V) mm
• Response Time : 12 ms (typical), “black” to “white”
• Contrast Ratio : 900:1 (typical)
• Light Intensity : 300 cd/m2 (typical)
• Viewable Angle : +/- 85 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 376.32 (H) x 301.056 (V) mm
• Max Colors : 16.7 million
SDIP-27 Level B has been approved with the following configuration:
• VGA IN and VGA OUT using Art: VSD100699-1 (HD15 DSUB female)
• DVI-D IN using Art: HA-SDM-2M-DVI-D (29P DVI-I female)
• Composite Video IN using Art: VSD100692-4 (DB9 RS-232 female,3xBNC)*
1 pcs of each cable above is included in delivery.
*Multifunction Cable
TFT Technology:
Synchronization:
Physical Considerations:
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
Available Accessories:
Environmental Considerations:
TFT Characteristics:
Supported Signals:
Power Specifications:
Signal Terminals:
User Controls:
Factory Options:
TEMPEST Configuration:
TEMPEST SDIP-27 Level B
TEMPEST certi ed by the
Norwegian National Security Authority