Heath Consultants Heath Data Recorder (HDR) - Manual (Page 11)

11
HDR Host Operating Software
HDR Host is the companion software interface to the HDR instrument. The application program provides for
configuration, calibration, local and remote communication, interrogation, data collection and data processing. The
program is supplied on CD ROM media. The self expanding executable “setup” file will guide the user through the
installation process.
This install will work in Windows operating systems for Win XP, Win Vista, Win 7 & Win 8.
NOTE: HDR Host must be on each workstation, in a network, that utilizes it. The data can be sent to a network drive
and be shared by other workstations that have HDR Host installed. Remember to change the “Data Paths” of each
workstation to use the same network drive and directory. DO NOT INSTALL THIS SOFTWARE DIRECTLY ONTO
THE NETWORK SERVER DRIVE.
Software Installation
To install, locate the file “HDR Host Setup4.02.EXE”. Double-click the file to install. Follow the instructions to
complete the installation process. After the software is installed, you may need to configure the com port to directly
connect to the instrument. Com 1 is very common; however, many newer computers are not equipped with a 9-pin
connector for direct connect with the standard com cable. A “USB to Serial adapter” may be required. Follow the
instructions included with the USB to serial adapter. After the adapter is installed and connected to the PC, go to “Start”/
Control Panel/ System/ Hardware/ Device Manager/ “Ports” (click the “+” to the left of “ports”) Look for “ATEN USB
to Serial Bridge (com xx)” Enter this port number in the HDR Host (Host Setup/ Configure Host)/ “Direct”. Any port
from 1-255 can be chosen. Note: Only the available ports will be listed in HDR Host/ Host setup “Name” dropdown.
NOTE: HDR Host requires a screen setting of at least 800 X 600. The bottom of the window may sometimes be out of
view.
Click “Next” to continue.