Heath Consultants Heath Data Recorder (HDR) - Manual (Page 42)

42
Spare Parts & Accessories
Pressure Transducer
The HDR may be equipped with a wide variety of ranges, most of which are available in either gauge or absolute.
Temperature Probe
Temperature Probes are normally supplied with six-foot l o n g metal sheathed cable. Contact factory for non-
standard lengths. The temperature probe is HPN 77R91-1035.
Modem (Internal Modem Assembly Retro Kit Part #77R61-9360)
Contact the factory for other configurations. Heath industrial modems are available in one of two configurations–
internal or external.
The standard HDR is ready for remote RS232 communications (with modem wiring harness). This will allow many
different communication options: CDMA (Cellular), IP, Radio, LAN or Satellite modems.
DESCRIPTION Heath PART#
Communication Cable (6’/9pin)
77R61-0070
Battery Pack (I.S.) Black 77R91-1037
Battery Pack (Non I.S.) Blue or Yellow 77R91-1091
Lithium Back-up Battery 77R65-8001
Coin Battery 77R65-8002
O-Ring for battery pack holder 77R63-0350
Modem (Internal 2400 Dial-up)
Internal Modem Battery Pack 77R61-9370
Telephone Surge Protector 77R61-9366
Internal Modem Harness (Pcb to modem harness) 77R65-1465
Internal Modem Assembly Retro Kit 77R61-9360
(Does not include surge protector)
Mounting Kits
Standard Mounting kit
77R61-9220
Large Mounting kit 77R61-9580
Spare PC Boards
Spare Main PCboard 77R65-9320-3
Spare Internal/External Modem PCboard 77R65-9216
External Temp Probe (6’cable X 6” probe) 77R91-1035
Spare Transducers Contact factory
External modem harness (locking connector) Contact factory
External modem harness (for dial out upon alarm) Contact factory
External power harness 12V (locking connector) Contact factory
Pulse out harness (locking connector) Contact factory
Pulse Input harness (locking connector) Contact factory
HDR Host software Contact factory