Labconco SteamScrubbe & FlaskScrubbe Glassware Washers 45781 Series - Manual (Page 27)

Chapter 4: Using Your Washer
Product Service 1-800-522-7658 23
Removing the Upper Rack
The upper rack may be easily removed from the Glassware Washer to facilitate
loading the rack outside the washer or to allow very tall glassware to be loaded
and washed on the lower rack.
To remove the upper rack:
1.
Slide the upper rack all the way out of the washer.
2.
Grasp each side of the rack placing a thumb on the release buttons.
3.
Press each release button and lift the rack straight upward.
To install the upper rack:
1.
The upper rack can be replaced into the washer by first sliding each slide rail
all the way out of the washer and then lowering the rack onto the rails.
2.
Press down and the latch will automatically engage the rail.
The FlaskScrubber Spindle Rack
The FlaskScrubber Glassware Washer is equipped with a lower spindle rack and
glassware holders. The FlaskScrubber spindle rack is designed for narrow-necked
glassware such as volumetric flasks, Erlenmeyer flasks, graduated cylinders,
Kjeldahl flasks, test tubes, and digestion tubes.