Martin Christ RVC 2-18 CDplus - Manual (Page 45)

RVC 2-18 CD& HCL
6 Operation
Version 04/2012, Rev. 1.4 of 25/11/2013 • sb
45
Translation of the original operating manual
Timer warm-up
You can set a warm-up time between 5 and 99 minutes.
Temperature warm-up
During the warm-up phase, the rotor temperature is set to the set
temperature.
Click at button push
If this function is activated, a brief sound signal can be heard whenever a
key is pressed.
High temperature resolution
Temperatures are displayed in the values window with a resolution of
1 /
10
°C
(instead of a resolution of 1°C).
Rotor speed
The rotor speed can be set in a range between 100 rpm and 1,750 rpm.
NOTE
We guarantee that a speed of 1,350 rpm can be reached with all of the
available rotors. Higher speeds are possible in individual cases.
Continuous operation VP
If this option is set to “yes”, the vacuum pump will not be switched off after
the evaporation. Instead, it will remain active. This is useful if several
evaporation processes are started in succession.
Service menu
Fig. 34: Service menu
Load default settings
All set values and parameters are reset to the delivery status of the RVC.
The reset requires confirmation.
Extended service menu
The extended service menu is exclusively reserved for service engineers.
This area is password-protected and not available to the user.
Pos: 137 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1