MOCET IP3092 User Manual
Page 2
Page 2
MOCET IP3092/IP3092L Communicator User Guide
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions in this manual, may cause interference to radio
communications. This equipment as been tested and found to comply with the limits for a Class B
computing device pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide
reasonable protection against radio interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference, in which case the
user, at is own expense, will be required to take whatever measures are necessary to correct the
interface.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility,
EN55022 class B for ITE and EN 50082-1. This meets the essential protection
requirements of the European Council Directive 89/336/EEC on the approximation of the
laws of the Member States relating to electromagnetic compatibility.
Environment
The phone you have purchased, as well as any used batteries must not be disposed of
with household waste. You should return these to your distributor if they are to replaced or
dispose of them in an approved recycling center.
Trademarks
iPad™, iPod™, iPhone™, iPad2™, the new iPad™, iTunes™, iOS™, Safari™, Airplay
TM
and Facetime™ are registered trademarks of Apple Inc., USA. All other company, brand
and product names, like Metaswitch™, Broadsoft™, Freeswitch™ and Asterisk™ are
registered trademarks of their respective owners.
WARNING!
▼
1.
Read these installation instructions carefully before connecting the IP phone to its power
2.
To reduce the risk of electric shock, do not remove the cover from the IP phone or attempt
to dismantle it. Opening or removing covers may expose you to dangerous voltage levels.
Equally, incorrect reassembly could cause electric shock on re-use of the appliance.
3.
Do not expose the IP Phone to Fire, direct sunlight or excessive heat.
4.
Do not expose the IP Phone to rain or moisture and do not allow it to come into contact with
water.
5.
Do not install the IP phone in an environment likely to present a THREAT OF IMPACT.
6.
You may clean the IP phone using a fine damp cloth. Never use solvents (such as
trichloroethylene or acetone), which may damage the phone’s plastic surface and LCD
screen. Never spray the phone with any cleaning product whatsoever.
7.
Take care not to scratch the LCD screen.
8.
The IP phone is designed to work in temperatures from 5
o
C to 40
o
C.
9.
The IP phone must be installed at least 1 meter from radio frequency equipment, such as
TVs, radios, hi-fi or video equipment (which radiate electromagnetic fields).
10.
Do not connect the LAN/PC port to any network other than an Ethernet network.
11.
Do not attempt to upgrade your IP phone in an unstable power environment. This could
cause unexpected issues.
12.
Do not work on the system or connect or disconnect cables during lightning storms.
13.
Children don't recognize the risks of electrical appliances. Therefore use or keep the phone
only under supervision of adults or out of the reach from children.
14. No repair can be performed by the end user, if you experience trouble with this
equipment, for repair or warranty information, please contact your supplier.
!
!