MOCET IP3092 User Manual
Page 37
Page 37
MOCET IP3092/IP3092L Communicator User Guide
3.7.2. Call Features
You may put your IP phone in DND mode, Auto Answer mode, or Call Waiting mode by
below steps:
Select “Settings” command from the main menu.
Select “Phone Settings” from the sub-command area
Select “Call Features” from the sub-command area
You may enable/disable the DND, Auto Answer, and Call Waiting modes from
below screen display:
3.7.3. Hotline Setting
The Communication provides 3 hotline numbers, when the user press the “
Hotline” hot-
key of Communication, the Communicator will auto dial out the first hotline number. If
nobody answers the call until timeout (you can configure the timeout setting from
Communicator’s web interface, please refer to the Communicator User Guide for the
configuration of Communicator web interface), then the Communicator will terminate the
first call, and dial the second hotline number out. The round robin will be continued
among these 3 hotline numbers until a call is answered, or the hotline call is cancelled.