Network setting – MOCET IP3092 User Manual
Page 34
Advertising
Page 34
MOCET IP3092/IP3092L Communicator User Guide
3.5. Network Setting
To configure the network type as Static IP or DHCP
Select “Settings” command from the main menu
Select “ Administrator Settings” from the sub-command area
IP Commander will ask you to input Admin Password. The default Admin
password is “1234”.
Enter the password and “Confirm”
Select “Network Settings” from the sub-command area
A Network type selection menu will be displayed as follows. You can specify the
network type as DHCP or static IP from this page.
Advertising