MOCET IP3092 - Manual (Page 35)

Page 35
MOCET IP3092/IP3092L Communicator User Guide
3.6. Line Setting
The IP Commander V2.x can support four SIP lines registration. To configure the SIP line
setting, you must subscribe to a VoIP service or use an IP PBX. To configure the SIP Line
settings:
Select “Settings” command from the main menu
Select “ Administrator Settings” from the sub-command area
IP Commander will ask you to input Admin Password. The default admin
password is “1234”.
Enter the password and “Confirm”
Select “Line Settings” from the sub-command area
Select “Line 1” or other line number that you want to configure
A Line Setting menu is displayed as follows, please fill out your SIP account data
in the provided fields then save the settings