Transferring a call, Forwarding a call – MOCET IP3092 User Manual
Page 43
Page 43
MOCET IP3092/IP3092L Communicator User Guide
4.8. Transferring a Call
A call can be transferred in two ways:
Blind Transfer: The call is automatically transferred after you dial the number of the party
to whom you want to transfer the call.
Attended transfer: The party to whom you want to transfer the call answers their phone
before you transfer the call. You can consult with them before completing the transfer.
Blind Transfer:
To do a blind transfer:
During an active call, press “New Call” soft-key from IP Commander to call
another party.
When you hear the ring-back tone, press the Transfer (
) key from IP
Commander to transfer the call.
Attended Transfer:
To do Attended transfer:
During an active call, press “New Call” soft-key from IP Commander to call
another party.
Wait for the other party to answer the call.
Press the Transfer (
) key from IP Commander to transfer the call.
4.9. Forwarding a Call
You can configure the IP3092/IP3092L Communicator to forward the incoming call to
another party.
There are four types of static forwarding:
Unconditional
Busy Forward
No Answer Forward
DND Forward