MOCET IP3092 - Manual (Page 39)

Page 39
MOCET IP3092/IP3092L Communicator User Guide
4. Using the Basic Features of Your Phone
The IP Commander supports four SIP line with 4 simultaneous calls. However, only one
call can be active at one time. The active call is the one you are using to speak or listen to.
The inactive calls can be:
On hold
Joined in a conference (with up to 3 callers)
“Incoming call” or “Ringing”
This chapter describes the basic operating instructions from IP Commander.
4.1. Line Setting
You can place a call in many ways from the IP Commander:
Using the handset
Using the speakerphone
Pressing the line key from IP Commander screen
Using the headset
Dial the number from IP Commander’s numeric keypad