Pitney Bowes RISO ComColor Printer - Manual (Page 15)

13
Administrator Settings
ComColor Series Administrator’s Guide 02
● The factory set values are underlined.
●
indicates settings that need to be configured when an IC card reader (optional) is connected.
User control
Printer
(Configure the printer functions and network)
• Network setting (IPv4)........................ (p. 18, 34)
• Network setting (IPv6)........................ (p. 18, 34)
• Network setting (Details) .................... (p. 18, 34)
• Ext. Controller setting............................... (p. 18)
• IP address limiting (IPv4) ................... (p. 18, 36)
• IP address limiting (IPv6) ................... (p. 18, 36)
• IPsec setting....................................... (p. 18, 36)
• IPsec setting (Ext. Ctrl.) ........................... (p. 19)
• Finished job setting .................................. (p. 19)
• Waiting job setting.................................... (p. 19)
• Printable area........................................... (p. 19)
• Envelope feed options.............................. (p. 20)
• Output tray in each mode......................... (p. 20)
• Stack guide control................................... (p. 20)
• Job name display ..................................... (p. 20)
• USB flash drive printing............................ (p. 20)
• Color/Black slice level .............................. (p. 20)
• Additional copies ...................................... (p. 20)
• High capacity feeder .......................... (p. 20, 38)
• High capacity stacker ............................... (p. 21)
Scanner
(Configure the scanner functions)
• Scan data save setting............................. (p. 21)
• Scan format confirmation ......................... (p. 21)
• Scanner data directory ....................... (p. 21, 38)
• Mail destination ........................................ (p. 21)
• Mail dest. direct input ............................... (p. 22)
• Mail setting ............................................... (p. 22)
Administrator Settings / Content
Setting/Description Set value/Details
Login setting
Specify whether login is required to enter a mode. Set this to restrict the users who can
use this machine.
See p. 24
Login method
Specify whether to enable PIN code authentication in addition to IC card authentication. To
enable logging in using a PIN code, select [IC card & User name].
Regardless of the machine's settings, you can log in from the RISO Console using
the PIN code.
IC card, IC card & User name
Authentication servers
Configure this setting using an external server when you authenticate a user who has an
account on an external server. A user without an account on an external server cannot be
authenticated.
If you used external server authentication, you do not need to register user
information to the printer, and you can manage the information centrally on the
server.
See p. 29