Pitney Bowes RISO ComColor Printer - Manual (Page 7)

5
ComColor Series Administrator’s Guide 02
Installing and Uninstalling the Printer Driver
CD-ROM Contents
The supplied CD-ROM includes an installer and
setup maker, each of which is contained in the
[Windows 32-bit] and [Windows 64-bit] folders.
Select the folder whose bit count matches the bit
count your operating system is running.
• Standard printer driver installer
This is a standard installer.
• Setup Maker
This utility is used to create a quick installer. Use
this utility to create an installer with customized
settings.
Installers
There are two installers.
• Standard installer
This is the installer recorded on the CD-ROM.
When using this installer, each user must configure
the printer driver options.
• Quick installer
This installer is created using setup maker.
(For information on how to create this installer, see
"Using Setup Maker to Create the Quick Installer".)
You can use the quick installer to install the printer
driver with customized settings. Users can start
using the printer driver to print from a computer
immediately without having to configure the
settings. This is useful when the printer driver
needs to be installed by many users.
This can also be used to manage and operate the
printer, such as setting [Duplex printing] and [Black]
to their default or restricting the use of color
printing.
The following settings can be customized.
• Color mode restrictions
• Default of printing preferences
• Settings of the [Properties] dialog box for
[Printers and Faxes]
Using Setup Maker to Create
the Quick Installer
1 Install the printer driver with the
standard installer.
2 Configure the settings.
Configure the default of the printing preference
and the settings of the [Properties] dialog box for
[Printers and Faxes].
3 Start Setup Maker.
Double-click [SetupMaker.exe]. This file is located
in the [SetupMaker] folder under the [Windows
64-bit] (or [Windows 32-bit]) folder on the
CD-ROM.
Choose a folder of the bit count your operating
system is running. Otherwise, setup maker would
not start.
4 Follow the displayed messages for
configuring the setting.
The quick installer is created.