Pitney Bowes RISO ComColor Printer - Manual (Page 35)

33
Administrator Settings
ComColor Series Administrator’s Guide 02
When using Non-RISO ink, configure this setting for each ink color.
<Description of settings>
Prohibited, Permitted
● The following problems may occur when using Non-RISO ink.
- Fading of prints and color tone changes due to differences in ink performance.
- Fading of prints or damage to the inkjet head (requiring replacement) due to a chemical reaction between the
ink and the parts in direct contact with the ink (inkjet head, ink path, etc.)
- Ink leaks (requiring replacement of the ink path) caused by air entering the ink path due to a chemical
reaction between the ink and the ink path (tubes, etc.)
● Malfunctions and reductions in performance as a result of using Non-RISO ink are not covered by the product
warranty or service contract. The inkjet head and ink path are expensive parts. In addition, it takes a long time to
replace these parts.
● Depending on the ink cartridge, you may not be able to use the ink cartridge even when the setting is set to
[Perm].
Please understand the above risks associated with
using Non-RISO ink before configuring the following
settings.
1 Press [Non RISO ink setting] on
the [Admin. Settings] screen.
2 Select [Perm], and then press
[OK].
3 Confirm the contents of the
confirmation message, and then
press [Yes].
Non-RISO Ink Setting (Only on the operation panel)