Pitney Bowes RISO ComColor Printer - Manual (Page 9)

7
ComColor Series Administrator’s Guide 02
About the Administrator
The settings the administrator must configure before the machine is available to users are as follows:
● To use this machine as a network printer, configure an IP address in "Network setting" first.
● To configure the default in copy or scanner mode, login as a user with administrator authority, and then proceed
to the mode screen. See "Save as default" in the "User's Guide" for details.
The administrator has the following two administrator authority.
• Changing the default and setting the usage environment.
• Accessing functions that can only be used by the administrator when using this machine.
■ Administrator settings
The administrator can configure the settings described in "Administrator Settings" (See p. 12).
For information on how to configure the settings, see "Configuring the Administrator Settings" (See p. 10).
1
Set the administrator
password
2
Login as a user with
administrator authority
3
Configure the network
settings
(If you connect the
machine to a network)
4
Registering Users
(See p. 23)
5
Configure the other
required administrator
settings
Workflow for configuring an administrator
Administrator Authority