Pitney Bowes RISO ComColor Printer - Manual (Page 41)

39
Administrator Settings
ComColor Series Administrator’s Guide 02
The following settings vary depending on the
specified protocol. An entry must be within 256
alphanumeric characters.
● Storage server IP address or URL
● Storage directory
● Directory shared name
● Storage directory (ex: ¥¥)
● Directory login name
● Directory login password
1 Press [Scanner data directory] on
the [Admin. Settings] screen.
2 Press [Add] to display a screen to
add a scanner storage directory.
3 Configure the settings.
When specifying an FTP server as the transfer
protocol
● In [Storage directory], specify the folder name
of the storage directory that you have set in the
FTP server.
● In [Directory login name], specify the user
name that you are using on your computer.
● In [Directory login password], specify the
password that you use for the user name
shown above.
4 Press [Communication test] to
check if the setting is correctly
registered.
The processing screen is displayed. When
communication is completed, the [Confirm] screen
is displayed.
5 Check the message on the
[Confirm] screen, and press
[Close].
The [Add] screen returns.
If communication fails, check the server of the
scanner storage directory and the network
environment.
If that does not help, check the setting of step 3
again.
6 Press [OK].
You can configure this function in the RISO
Console. (See p. 11)