Pitney Bowes RISO ComColor Printer - Manual (Page 20)

18
ComColor Series Administrator’s Guide 02
Printer
Setting/Description Set value/Details
Network setting (IPv4)
Configure this setting for connecting this machine to a network.
This is a setting for connecting to an Internet protocol Ver.4 network.
If you configure from the RISO Console, you can register the IPv4 and IPv6
network setting and the network setting (details) in the [Network setting] screen.
See p. 34
Network setting (IPv6)
Set this to use this machine connected to a network. This is a setting for connecting to an
Internet protocol Ver.6 network.
See p. 34
Network Setting (Details)
Configure the details of a network. The setting items vary depending on what network you
use.
See p. 34
Ext. Controller setting (only the touch panel when the
ComColorExpress IS1000C or IS950C is connected)
Configure this setting for connecting this machine and an external controller to a network.
The setting items vary depending on what network you use.
• Setting by:
IP address (IPv4), IP address (IPv6)
When using IPv4:
• DHCP server
Not Use, Use
• IP address
• Subnet mask
• Gateway address
When using IPv6:
• How to set an address:
Manual/Stateless address/Stateful
address
• IP address
• Prefix length
• Gateway address
IP address limiting (IPv4) / (IPv6)
Use this to restrict the computers that can use this machine. Enter the IP addresses and
subnet masks (IPv4) or prefix length (IPv6) of the computers that are allowed to access
this machine.
See p. 36
IPsec setting
Configure this setting to use data encryption technology to prevent data leaks and
fabrication in a network environment. The setting items vary depending on what network
you use.
See p. 36