Pitney Bowes RISO ComColor Printer - Manual (Page 44)

42
ComColor Series Administrator’s Guide 02
■ Settings affected by network setting, and what users are affected by
If you are using the machine connected to the network, you cannot configure each function without
configuring [Network setting (IPv4)/(IPv6)] and [Network setting (Details)] in advance. Be sure that you
configure [Network setting (IPv4)/(IPv6)] and [Network setting (Details)] before configuring each setting.
The functions with which each user uses the network depend on the administrator setting.
To enable each user to use the following functions, you need to configure the settings below in the
administrator setting.
Functions that users can use What you configure in the administrator setting
Sending print jobs and using the RISO Console in
the network environment
• [Network setting (IPv4)]
• [Network setting (IPv6)]
Saving scan data to the server
• [Network setting (IPv4)] or [Network setting (IPv6)]
• [Scanner data directory]
• [Network setting (Details)] if you specify a storage directory using the server
name
Sending scan data by e-mail
• [Network setting (IPv4)] or [Network setting (IPv6)]
• [Mail setting]
• [Mail destination]
• [Mail dest. direct input]
• [Network setting (Details)] if you specify a mail server address using the server
name
Network setting (IPv4)
or
Network setting (IPv6)
What users can do What only the administrator can configure
Mail setting
Mail destination
Mail dest. direct input
Network setting
(Details)
Sending print jobs
Restricting access to the network
using IP address
RISO Console
Scanner data directory
Authentication servers
NTP time synchronization
IPsec setting
IP address limiting (IPv4)
or
IP address limiting (IPv6)
Strengthening network communication
security using encryption technology
User authentication using authentication servers
(Use of some functions is restricted. See p. 29.)
Sending scan data by e-mail
Saving scan data to the server
What users are affected by