Pitney Bowes RISO ComColor Printer - Manual (Page 34)

32
ComColor Series Administrator’s Guide 02
2 Press [ON].
3 Press a day of the week.
4 Select [ON] in [Start] and [End],
and set the time.
5 Select a day of the week for which
you want to set the time.
You can set the same time to two or more days of
the week.
6 Press [OK].
When this function is enabled, the [Confirm]
screen is displayed on the control panel one
minute before the end time.
Press [Suspend] if you do not want to turn the
power off.
● If you do not press the [Suspend] button within
one minute after the screen is displayed, the
end process starts.
● If you press [Suspend], you can close the
[Confirm] screen temporarily to suspend the
end process. One minute later, the [Confirm]
screen will be displayed again.
In any of the following cases, the sub power does
not turn off.
● When a paper jam, service call, unit error, set-
related error, or warning error has occurred
● When the machine is in use at the set time
● You can configure this function in the RISO
Console. (See p. 11)