User leds, Push button switches, The flash tab – Altera 100G Development Kit, Stratix V GX Edition User Manual
Page 25: Start address, User leds –7 push button switches –7, The flash tab –7, Start address –7
Advertising
Chapter 6: Board Test System
6–7
Using the Board Test System
August 2012
Altera Corporation
100G Development Kit, Stratix V GX Edition
User Guide
User LEDs
This control displays the current state of the user LEDs.
Push Button Switches
This read-only control displays the current state of the board user push buttons. Press
a push button on the board to see the graphical display change accordingly.
The Flash Tab
The Flash tab allows you to read and write flash memory on your board.
shows the Flash tab.
The following sections describe the controls on the Flash tab.
Start address
This control allows you to enter an 8-hex digit (preceding with the 0x hex identifier).
Figure 6–4. The Flash Tab
Advertising