Altera 100G Development Kit, Stratix V GX Edition - Manual (Page 30)

6–12 Chapter 6: Board Test System
Using the Board Test System
100G Development Kit, Stratix V GX Edition August 2012 Altera Corporation
User Guide
The XCVR2 Tab
The XCVR2 tab allows you to perform loopback tests on the SFP and SMA ports.
Figure 6–6 shows the XCVR2 tab.
The following sections describe the controls on the XCVR2 tab.
Status
The Status control displays status information during the loopback test. For details on
this control, refer to
“Status” on page 6–9 .
Port
The Port control allows you to specify which interface to test. The following port tests
are available:
■ SFP0, SFP1, SFP2, SFP3
■ SMA x2
Figure 6–6. The XCVR2 Tab