Altera Stratix IV GX FPGA - Manual (Page 31)

Chapter 6: Board Test System 6–7
Using the Board Test System
March 2014 Altera Corporation Stratix IV GX FPGA Development Kit User Guide
1 If you exceed the 16 character display limit on either line, a warning message appears.
User DIP Switches
The read-only User DIP switches control displays the current positions of the
switches in the user DIP switch bank (SW3). Change the switches on the board to see
the graphical display change accordingly.
User LEDs
The User LEDs control displays the current state of the user LEDs. Click the graphical
representation of the LEDs to turn the board LEDs on and off.
Push Button Switches
The read-only Push button switches control displays the current state of the board
user push buttons. Press a push button on the board to see the graphical display
change accordingly.